Lightweight Aluminium Ball Set Hard-Coated (for X3)

HONG NOR
Lightweight Aluminium Ball Set Hard-Coated (for X3)
34,90 € *

inkl. MwSt. zzgl. Versandkosten

Sofort versandfertig, Lieferzeit ca. 1-2 Werktage

  • Artikel-Nr.: 398-X3
Beschreibung Bewertungen 0
Beschreibung
mehr
Menü schließen
Produktinformationen "Lightweight Aluminium Ball Set Hard-Coated (for X3)"
"Lightweight Aluminium Ball Set Hard-Coated (for X3)"

Verantwortlicher nach GPSR / person responsible GPSR

Gruber-Racing

Thiergartner Weg 14

08527 Plauen

info@gruber-racing.de

www.gruber-racing.de

Hersteller / Manufacturer

Hong Nor Hobbies International Co., Ltd.

8F.,No.184, Sec. 4,Chengde Rd.,

Shihlin Dist., Taipei 11167, Taiwan

Tel:+886-2-2888-1221

Hong Nor Hobbies International Co., Ltd.

e-mail:hong_nor@hci-rc.com

ACHTUNG: Nicht für Kinder unter 36 Monaten geeignet

wegen verschluckbarer Kleinteile, Erstickungsgefahr.
CAUTION: Not suitable for children under 36 months

due to small parts that can be swallowed, choking hazard.

 

ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet.

Benutzung unter unmittelbarer Aufsicht von Erwachsenen.
CAUTION: Not suitable for children under 14 years of age.

Use under the direct supervision of adults.


Sicherheitshinweise GHS / H-Sätze | Safety instructions / Hazard Statements

  • H 315: Verursacht Hautreizungen (Causes skin irritation)

  • H 319: Verursacht schwere Augenreizung (Causes severe eye irritation)

  • H 335: Kann die Atemwege reizen (May irritate the respiratory tract)

Sicherheitshinweise GHS / P-Sätze | Safety instructions / Precautionary Statements

  • P 102: Darf nicht in die Hände von Kindern gelangen. (Keep out of the reach of children.)

  • P 261: Einatmen von Staub / Rauch / Gas / Nebel / Dampf / Aerosol vermeiden.

    (Avoid inhalation of dust / smoke / gas / mist / vapour / aerosol.)

  • P 271: Nur im Freien oder in gut belüfteten Räumen verwenden. (Only use outdoors or in well-ventilated rooms.)

  • P 280: Schutzhandschuhe / Schutzkleidung / Augenschutz / Gesichtsschutz tragen. (Wear protective gloves /

    protective clothing / eye protection / face protection.)

  • P 305+351+338: Bei Kontakt mit den Augen: Einige Minuten lang behutsam mit Wasser spülen.

    Vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen (In case of contact with eyes:

    Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing)

  • P 312: Bei Unwohlsein Giftinformationszentrum oder Arzt anrufen. (If you feel unwell, call a poison information centre or doctor.)

  • P 405: Unter Verschluss aufbewahren. (Store under lock and key.)

  • P 501: Inhalt/Behälter … zuführen. (Feed contents/container ....)

Sicherheitshinweise / EUH | Safety instructions / EUH

  • EUH 202: Cyanacrylat. Gefahr. Klebt innerhalb von Sekunden Haut und Augenlider zusammen.

    Darf nicht in die Hände von Kindern gelangen. 



Bewertungen 0
Bewertungen lesen, schreiben und diskutieren... mehr
Menü schließen
Kundenbewertungen für "Lightweight Aluminium Ball Set Hard-Coated (for X3)"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.

Kunden kauften auch Kunden haben sich ebenfalls angesehen
Kunden kauften auch
Lightweight Ball End Post (4 pcs) (4g) Lightweight Ball End Post (4 pcs) (4g)
15,90 € *
Art.: 434
Rear Lower Arms L&R (Hard) Rear Lower Arms L&R (Hard)
13,90 € *
Art.: X3-53H
Front Lower Arms L&R (Hard) use with X3-45B Front Lower Arms L&R (Hard) use with X3-45B
13,90 € *
Art.: X3-45H
New FRONT Anti-roll Bar 2,8mm New FRONT Anti-roll Bar 2,8mm
4,90 € *
Art.: X3S-53-2.8
CVD Wheel Axle 7075 Alum. (2pcs) CVD Wheel Axle 7075 Alum. (2pcs)
18,90 € *
Art.: X3S-45
Adjustable anti-roll bar ball end set (for NEW roll bars) Adjustable anti-roll bar ball end set (for NEW roll bars)
6,50 € *
Art.: X3S-52
New FRONT Anti-roll Bar 2,3mm New FRONT Anti-roll Bar 2,3mm
4,50 € *
Art.: X3S-53-2.3
New FRONT Anti-roll Bar 2,5mm New FRONT Anti-roll Bar 2,5mm
4,50 € *
Art.: X3S-53-2.5
New REAR Anti-roll Bar 2,3mm New REAR Anti-roll Bar 2,3mm
4,50 € *
Art.: X3S-54-2.3
New REAR Anti-roll Bar 2,5mm New REAR Anti-roll Bar 2,5mm
4,50 € *
Art.: X3S-54-2.5
New REAR Anti-roll Bar 2,8mm New REAR Anti-roll Bar 2,8mm
4,90 € *
Art.: X3S-54-2.8
New REAR Anti-roll Bar 3,0mm New REAR Anti-roll Bar 3,0mm
4,90 € *
Art.: X3S-54-3.0
Front Arm Bushing (4 pcs) Front Arm Bushing (4 pcs)
5,90 € *
Art.: X3-45B
GT Shock Shafts for front & rear titatium coated (2 pcs) GT Shock Shafts for front & rear titatium coated (2 pcs)
9,90 € *
Art.: 418A-T
Carbon Graphite Rear Body Mount (Set) for X3-GTS Carbon Graphite Rear Body Mount (Set) for X3-GTS
24,90 € *
Art.: X3GT-83
4mm Carbon Low Profile Rear Shock Stay 4mm Carbon Low Profile Rear Shock Stay
32,90 € *
Art.: X3GT-79
New FRONT Anti-roll Bar 2,0mm New FRONT Anti-roll Bar 2,0mm
4,50 € *
Art.: X3S-53-2.0
Covered Serrated Wheel Nuts (P1.25) Black (4 pcs) Covered Serrated Wheel Nuts (P1.25) Black (4 pcs)
20,90 € *
Art.: 449-BK
1.3x6 - 16mm Shock Body Damper Cylinder Piston Set (4 pcs) 1.3x6 - 16mm Shock Body Damper Cylinder Piston Set (4 pcs)
9,90 € *
Art.: 423C
CNC aluminum Servo Arm 23T CNC aluminum Servo Arm 23T
19,90 € *
Art.: X3S-50-23
Optional 13T+46T Gear Set Optional 13T+46T Gear Set
35,90 € *
Art.: X3S-51
58T (2nd) Spur Gear (Hard) Modul 0.8 58T (2nd) Spur Gear (Hard) Modul 0.8
10,90 € *
Art.: 429D-H
57T (2nd) Spur Gear (Hard) Modul 0.8 57T (2nd) Spur Gear (Hard) Modul 0.8
10,90 € *
Art.: 428P-H
62T (1st) Spur Gear (Hard) Modul 0.8 62T (1st) Spur Gear (Hard) Modul 0.8
10,90 € *
Art.: 429B-H
61T (1st) Spur Gear (Hard) Modul 0.8 61T (1st) Spur Gear (Hard) Modul 0.8
10,90 € *
Art.: 428O-H
Alum. Throttle Bell Crank (1 pcs) Alum. Throttle Bell Crank (1 pcs)
19,90 € *
Art.: X3GT-69
Alum. Throttle Bell Crank Post Alum. Throttle Bell Crank Post
4,90 € *
Art.: X3GT-68
Extended exhaust tube fixed rod (11cm long) Extended exhaust tube fixed rod (11cm long)
6,50 € *
Art.: 430
2nd Ball (pin 5x4.8) (2 pcs) 2nd Ball (pin 5x4.8) (2 pcs)
4,50 € *
Art.: 428K
Steering Servo Saver, Alum Steering Servo Saver, Alum
23,90 € *
Art.: X3GT-53
Swaybar Inserts From 2-2.4mm (2 pcs) Swaybar Inserts From 2-2.4mm (2 pcs)
11,90 € *
Art.: X3S-42A
Carbon/Aluminium Servo Saver Set Carbon/Aluminium Servo Saver Set
59,90 € *
Art.: X3S-44
Carbon Unterteil Rammer Set (46,9g) Carbon Unterteil Rammer Set (46,9g)
36,90 € *
Art.: K18001
Carbon Oberteil Rammer (1 pcs) (20g) Carbon Oberteil Rammer (1 pcs) (20g)
25,90 € *
Art.: 18003
2.5x17 Pins (4 pcs) 2.5x17 Pins (4 pcs)
3,30 € *
Art.: 267E
AL Steering Block Arm System Set AL Steering Block Arm System Set
72,90 € *
Art.: X3S-33
Tatinium Turn Buckle Set Tatinium Turn Buckle Set
46,90 € *
Art.: X3S-18
Screw Type Rear Hub Carrier Shaft (2 pcs) Screw Type Rear Hub Carrier Shaft (2 pcs)
9,90 € *
Art.: X3S-16
Diff. Cap Joint (Lightweight) (2 pcs) Diff. Cap Joint (Lightweight) (2 pcs)
14,90 € *
Art.: X3S-04
3mm Carbon front shock end plate (2 pcs) 3mm Carbon front shock end plate (2 pcs)
13,90 € *
Art.: X3GT-18C
Kunden haben sich ebenfalls angesehen
マヤコ Mayako MX8E-25 (Limited Edition) 1:8 EP 4WD Elektro Buggy マヤコ Mayako MX8E-25 (Limited Edition) 1:8 EP 4WD Elektro Buggy
899,99 € *
Art.: MYE0377-25LE
マヤコ Mayako MX8E-25 1:8 EP 4WD Elektro Buggy マヤコ Mayako MX8E-25 1:8 EP 4WD Elektro Buggy
599,99 € *
Art.: MYE0377-25
Carbon Graphite Rear Body Mount (Set) for X3-GTS Carbon Graphite Rear Body Mount (Set) for X3-GTS
24,90 € *
Art.: X3GT-83
Silicon Joint Cover (4 pcs) Silicon Joint Cover (4 pcs)
5,90 € *
Art.: 326
Optional 13T+46T Gear Set Optional 13T+46T Gear Set
35,90 € *
Art.: X3S-51
Swaybar Inserts From 2.5-3mm (2 pcs) Swaybar Inserts From 2.5-3mm (2 pcs)
11,90 € *
Art.: X3S-42B
TIPP
X3S EVO E 1/8 Buggy 4WD Pro Kit Electric X3S EVO E 1/8 Buggy 4WD Pro Kit Electric
553,35 € * 664,90 € *
Art.: 64017
Diff. Cap Joint (Lightweight) (2 pcs) Diff. Cap Joint (Lightweight) (2 pcs)
14,90 € *
Art.: X3S-04
T-Works Titan Madenschrauben zur Ausfederwegsbegrenzung - M4x14mm (4 Stück) T-Works Titan Madenschrauben zur Ausfederwegsbegrenzung - M4x14mm (4 Stück)
10,90 € *
Art.: TP-087-E
T-Works Titan Madenschrauben zur Ausfederwegsbegrenzung - M4x12mm (4 Stück) T-Works Titan Madenschrauben zur Ausfederwegsbegrenzung - M4x12mm (4 Stück)
9,90 € *
Art.: TP-087-D
TIPP
X3 GTS 1/8 Nitro GT World Champion Edition + 1/8 GT nitro onroad Motor (GP5R'24) X3 GTS 1/8 Nitro GT World Champion Edition + 1/8 GT nitro onroad Motor...
1.199,00 € * 1.338,90 € *
Art.: X3nitroCombo-2
X3GTS 1/8 GT Nitro Pro Kit + 1/8 GT nitro onroad Motor (GP5R'24) X3GTS 1/8 GT Nitro Pro Kit + 1/8 GT nitro onroad Motor (GP5R'24)
1.115,01 € * 1.238,90 € *
Art.: X3nitroCombo
T-Works 64 Titan Rundkopfschraube Innensechskant M3 x 8mm (10 Stück) T-Works 64 Titan Rundkopfschraube Innensechskant M3 x 8mm (10 Stück)
11,90 € *
Art.: TSS-308B
T-Works Kolbenbolzen Tool für Nitro Motoren - 2.11 und 3.5ccm T-Works Kolbenbolzen Tool für Nitro Motoren - 2.11 und 3.5ccm
49,90 € *
Art.: TT-056
PIP-Aero 325mm -PRE-CUT Hong Nor- 1/8 GT Karosserie 1,0mm / Efra #6011 PIP-Aero 325mm -PRE-CUT Hong Nor- 1/8 GT Karosserie 1,0mm / Efra #6011
46,50 € *
Art.: BT62-10-Pre-Cut-H
Distanzscheibe für Top Deck Carbon (2 pcs) Distanzscheibe für Top Deck Carbon (2 pcs)
4,95 € *
Art.: X3GT-43B
Front/Rear Differential Set (46T version) Front/Rear Differential Set (46T version)
39,90 € *
Art.: X3-97
1/8 Nitro onroad - LAB C804 R 1/8 Nitro onroad - LAB C804 R
899,00 € *
Art.: CAP-2640-K
Bearing, 4x8 Flange (2 pcs) for X3S-44 Set Bearing, 4x8 Flange (2 pcs) for X3S-44 Set
11,90 € *
Art.: JS-06B
Smart-Com RC Headset set Smart-Com RC Headset set
379,90 € *
Art.: SCH-8286-13
Ligheweight Aluminium Ball Set, Hard-Coated (for X1) Ligheweight Aluminium Ball Set, Hard-Coated (for X1)
30,90 € *
Art.: 398
2-SPEED SET Modul 0.8 2-SPEED SET Modul 0.8
99,90 € *
Art.: 428
Lower Arms Front / Rear (2 pcs) Lower Arms Front / Rear (2 pcs)
15,90 € *
Art.: XT-18
Lightweight 7x8.5mm Alum, Ball (4 pcs) Lightweight 7x8.5mm Alum, Ball (4 pcs)
10,90 € *
Art.: 398F
Clutch Shoe Set Clutch Shoe Set
26,90 € *
Art.: 442
Swaybar Inserts From 2-2.4mm (2 pcs) Swaybar Inserts From 2-2.4mm (2 pcs)
11,90 € *
Art.: X3S-42A
5x8 Flange Bearing (2 pcs) 5x8 Flange Bearing (2 pcs)
6,20 € *
Art.: 277A
Plastic Rod End (4 pcs) Plastic Rod End (4 pcs)
3,90 € *
Art.: LS-28B
6x10 Ball Bearing (4 pcs) 6x10 Ball Bearing (4 pcs)
15,90 € *
Art.: JS-14B
8mm Lightweight Cap joint for brake (2 pcs) (18g) 8mm Lightweight Cap joint for brake (2 pcs) (18g)
13,90 € *
Art.: 435
CNC 7075 Engine Mount CNC 7075 Engine Mount
45,90 € *
Art.: X3S-35
17mm Wheel Hub + 1.9mm Black (2 pcs) 17mm Wheel Hub + 1.9mm Black (2 pcs)
12,50 € *
Art.: X3S-15-BK
Body Mount Set Front and Rear Body Mount Set Front and Rear
7,90 € *
Art.: X3-84
Rear Lower Arms L+R Rear Lower Arms L+R
9,90 € *
Art.: X3-53
Plastic Rod End set Plastic Rod End set
11,40 € *
Art.: X3-50
Servo Saver Connect Plate Screw Servo Saver Connect Plate Screw
5,90 € *
Art.: X3-21
T-Works Titan Madenschrauben zur Ausfederwegsbegrenzung - M4x10mm (4 Stück) T-Works Titan Madenschrauben zur Ausfederwegsbegrenzung - M4x10mm (4 Stück)
8,90 € *
Art.: TP-087-B
T-works - 7075-T6 Alum. Ball Set (Hard Coated) - für Asso RC8 B4 (21 Stück) T-works - 7075-T6 Alum. Ball Set (Hard Coated) - für Asso RC8 B4 (21 Stück)
36,90 € *
Art.: TO-200-B4
Shock Spring (White) - Hard (H) - (0,76 kg/mm) - 35x16mm (2 pcs) Shock Spring (White) - Hard (H) - (0,76 kg/mm) - 35x16mm (2 pcs)
8,90 € *
Art.: X3GT-85S-2
GRP 1/5 Bike - Slick R2 - Hinten - Komplettrad fertig verklebt (1 Stück) GRP 1/5 Bike - Slick R2 - Hinten - Komplettrad fertig verklebt (1 Stück)
31,90 € *
Art.: GRX22-R2
Zuletzt angesehen