Produkte von Mayako

Longer Droopscrews for the rear arm

Enhanced Throttle Server Holder with Additional Airflow Options

Extended Throttle Server Holder with Enhanced Airflow Capabilities

Enhanced Heat Insulation Against Chassis Heat, Designed for Use with the Airflow Aluminum Throttle Servo Holder (MYB0090A/MYB0090-01A)

Enhance the Rear Brace Stiffness for Improved Structural Integrity

MYB0189 and one of the Floating Steering Servo Plates MYB0189/-01/CF is needed

MYB0189 and MYB0190 is needed to complete the Floating Steering Servo Build

MYB0189 and MYB0190 is needed to complete the Floating Steering Servo Build

MYB0189 and MYB0190 is needed to complete the Floating Steering Servo Build

Enhanced Rear Chassis Stiffness Achieved by Replacing the Differential Height Shim

Enhanced Rear Chassis Stiffness Achieved by Replacing the Differential Height Shim

Enhanced Rear Chassis Stiffness Achieved by Replacing the Differential Height Shim

STOCK SETUP SHEET MAYAKO MX8E-24 Setup Sheet Version 1.1 EMPTY SETUP SHEET MAYAKO MX8E-24 Setup Sheet Version 1.1 The Mayako MX8-24 is the car for everyone! Building on the proven success of the MX8-22, the MX8-24 is the next step in...

Mayako - Mayako Official Pitmat (100x60cm)

Sticker sheet with all the different logos made for the Mayako Brand Name.

Red 1mm shim used to adjust the height of the steering knuckle.

Small 2mm red shims, can be used in various places. For instance used to adjust bump steer of the front end.

Small 1mm red shims, can be used in various places. For instance used to adjust bump steer of the front end.

Standard steel screws for the MX8 buggy.

Standard steel screws for the MX8 buggy.

Standard steel screws for the MX8 buggy.

Standard steel screws for the MX8 buggy.

Standard steel screws for the MX8 buggy.

2025 Limited Edition Do you want all the best option parts in your kit as standard? This is your best chance to get all the goods, saving you a ton of money. The following is a list of the spec that separates this Limited Edition 2025...

2025 Limited Edition Do you want all the best option parts in your kit as standard? This is your best chance to get all the goods, saving you a ton of money. The following is a list of the spec that separates this Limited Edition 2025...

Hardware Included: 2pcs M3x20mm Counter Sunk Screws 1pcs M4x8mm Counter Sunk Screw (For 0-1mm Height Shims) 1pcs M4x10mm Counter Sunk Screw (For 2-3mm Height Shims) 4pcs 3x5x1mm Shims 3pcs 4x7x1mm Shims Needed to complete: MYB0050-03...

The body of the new 3-piece rear hub, you will also need MYB0182, MYB0183, MYB0048-03, MYB0050-03, MYH0050. Or you buy the complete rear hub set MYB0180 (sold as 1 piece).

The link mount of the new 3-piece rear hub, you will also need MYB0181, MYB0183, MYB0048-03, MYB0050-03, MYH0050. Or you buy the complete rear hub set MYB0180 (sold as 1 piece).

Mayako - 3-Piece CNC Rear Hub Mounting Bracket for Mayako MX8

Red shim to adjust the link hegiht on the new 3-piece rear hub.

New rear suspension arm with adjustable arm length. You need the new 3-piece rear hub (MYB0180) in case you want to use middle or shortest arm option

Plastic bearing bushings to adjust axle height in the new 3-piece rear hub (MYB0180).

Plastic inserts for the new 3-piece rear hub to be able to run the different lengthes of the new rear suspension arm (MYB0036-01).

Rear short universal, like the 94mm but shorter length! Use it with the longer outdrives MYB0119-01

Front universal driveshafts 99mm long. 2pcs The front universal will provide more initial steering but be more aggressive. To use the front universal, you will need the updated front knuckles: Left KPI0.5 - MYB0042B-01 Right KPI0.5 -...

Mayako - Long Differential Outdrives (Front-Rear) for Mayako MX8 (2 pcs) Long outdrives to fit shorter driveshafts:

Aluminium diff cross pins that will save you weight in your drive train

Mayako - Wheel Hex 4mm for Mayako MX8 (2 pcs)

C-Block Wide 54mm, use with MYB0030-03A for 1.5deg, for Mayako MX8 (-24) If you want to get more rear support and more rotation off power use these wide blocks. You must use with the adjustable rear arms MYB0036-01 But beware, the car...

Lower D-Block so you can run a lot of anti-squat and with a low arm position. With the height insert in the middle on this block, the D-Block height is the same as lowered 1mm on the stock D-Block.

Plastic inserts to adjust the length of the new rear suspension arm (MYB0036-01).

Rear tower link insert to be able to adjust short or long link on the new aluminium rear tower for the MX8 buggy.

Mayako - Rear Universal Driveshaft Pair 91mm for 8x16x5 bearing, for Mayako MX8 (2 pcs)

The 94mm rear driveshaft we all know but with round hole axle Optional rear universal shaft. You also need to change to the bigger 13X19X4 bearings in the hub. Parts needed to run 94mm rear unversal: MYB0052-01 Rear Universal Driveshaft...

Mayako - D-Block (Screw Type Inner Hinge Pin), use with MYB0029A for 3deg (54.5), for Mayako MX8

Mayako - D-Block (Screw Type Inner Hinge Pin), use with MYB0029-02A for 0.5deg (52), for Mayako MX8

D-Block (Screw Type Inner Hinge Pin), use with MYB0029-01A for 1.5deg (53), for Mayako MX8

Mayako titanium gearbox screws saves weight compared to standard steel screws

Mayako - Carbon Fibre Long Link Rear Shock Tower for Mayako MX8

C-Block Wide 54mm, use with MYB0030-03A for 1.5deg, for Mayako MX8 (-24) If you want to get more rear support and more rotation off power use these wide blocks. You must use with the adjustable rear arms MYB0036-01 But beware, the car...

Used with the upper arm rear end setup, note that you also need following items to complete the rear end with upper arm setup: tower MYB0155, arms MYB0160, rear arm posts MYB0159, rear arm brace MYB0158, pills MYB0031-02, turnbuckle...

Rear tunrbuckle for upper arm conifiguration.

Used with the upper arm rear end setup, note that you also need following items to complete the rear end with upper arm setup: tower MYB0155, arms MYB0160, hinge pins MYB0163R, rear arm brace MYB0158, pills MYB0031-02, turnbuckle MYB0162 to

Used with the upper arm rear end setup, note that you also need following items to complete the rear end with upper arm setup: tower MYB0155, arms MYB0160, rear arm posts MYB0159, hinge pins MYB0163R, pills MYB0031-02, turnbuckle MYB0162 to

Body 2.0 without sidewings, LW as well 0.8mm for Mayako MX8

Coloured option of the Mayako "1.0" wing which is a little more narrow than the "2.0" version MYB0152-01-BLK

Coloured option of the Mayako "1.0" wing which is a little more narrow than the "2.0" version MYB0152-01-BLK

Coloured option of the Mayako "1.0" wing which is a little more narrow than the "2.0" version MYB0152-01-BLK

The 2.0 wing and "The Wing of David", developed in the first few months as Mr. DR joined Mayako. The wing is slightly wider than the "1.0" wing.

The 2.0 wing and "The Wing of David", developed in the first few months as Mr. DR joined Mayako. The wing is slightly wider than the "1.0" wing.

Mayako - 2.7mm Rear Anti-Roll Bar for Mayako MX8

Mayako - 2.6mm Rear Anti-Roll Bar for Mayako MX8

Mayako - 2.4mm Rear Anti-Roll Bar for Mayako MX8

Carbon fiber plate for the first generation aluminium rear hubs, with this you can achieve the shortest settings for the rear camber link. For longer settings you need to get the MYB0051CF-01A.

Carbon fiber plate for the first generation aluminium rear hubs, with this you can achieve the longest settings for the rear camber link. For short settings you need to get the MYB0051CF-02A

Inserts to change height and toe in for MYB0050-01 aluminium rear hub for Mayako MX8

Aluminium left or right rear hub for Mayako MX8 For a pair of rear hubs you need: 2x MYB0050-01 1x MYB0048-02 1x MYB0050-02 Plus one of the below (option for long or short link): 1x MYB0051CF-01A - Long link (stock length) 1x...

Rear Arm Carbon Braces used with MYB0036 Rear arms for Mayako MX8

Mayako - C-Block (Screw Type Inner Hinge Pin), use with MYB0030A for 3deg (48.5), for Mayako MX8

Mayako - C-Block 51mm (Screw Type Inner Hinge Pin), use with MYB0030-02A for 0.5deg, for Mayako MX8

Mayako - C-Block 50mm (Screw Type Inner Hinge Pin), use with MYB0030-01A for 1.5deg, for Mayako MX8 C-Block 50mm for Mayako MX8 for Screw Type Inner Hinge Pin. These blocks are stock on -23 and newer models. They work on older models...

Updated tower with the option for adjustable wing height. Shock mounting height raised by 2mm. Inserts (MYB0178) included with tower. Inserts used for link position to allow finer adjustment of link length.

Rear wing mount for MX8 platform

Mayako - Rear Outer Hinge Pin for Mayako MX8 (2 pcs)

Mayako - Rear Gearbox for Mayako MX8

Mayako - Rear Arms with Plastic Braces for Mayako MX8 (2 pcs)

Rear Arm Plastic Braces used with MYB0036 Rear arms for Mayako MX8

Rear 2mm Plastic Gearbox Spacer used with MYB0014-02 2mm spacer, inserted in MYB0013 rear brace for Mayako MX8

Rear 1mm Plastic Gearbox Spacer used with MYB0014-01 1mm spacer, inserted in MYB0013 rear brace for Mayako MX8

Mayako - Plastic Rear Hub Spacers 2 x 2mm, 4 x 1mm for Mayako MX8

Plastic Rear Brace used with diffrents spacers, when you drive with diffrent heights of the rear gearbox for Mayako MX8

Plastic Left and Right Rear Hubs for Mayako MX8

Light Weight Lexan Winglets to use for the two diffrent type of wings MYB0152-BLK Wing and MYB0152-01-BLK Wing 2.0 "The Wing Of David" for Mayako MX8

Lexan Winglets to use for the two diffrent type of wings MYB0152-BLK Wing and MYB0152-01-BLK Wing 2.0 "The Wing Of David" for Mayako MX8

Aluminium upper link balls inserted in MYB0063 Plastic upper link curved ball ends for Mayako MX8

Aluminium wing shims for Mayako MX8

Mayako - 2.5mm Rear Anti-Roll Bar for Mayako MX8

Light Weight (STD) Body with sidewings for Mayako MX8

Mayako - Radio Box Set (Yellow) for Mayako MX8

Mayako - Radio Box Set (Orange) for Mayako MX8

Mayako - Radio Box Set (Green) for Mayako MX8

Mayako - Plastic Sideguards (Green) for Mayako MX8 (2 pcs)

Mayako - Plastic Sideguards (Yellow) for Mayako MX8 (2 pcs)

Mayako - Plastic Sideguards for (Orange) Mayako MX8 (2 pcs)

Rear steel replacable skid plate for longer life of the main chassi plate

Mayako - Radio Box Set (black) for Mayako MX8

Radio Box Hinge Screw and Wire Boot for MYB0096 Radio box for Mayako MX8

Plastic Throttle Servo Brace intended to use with MYB0090 (STD) Aluminium throttle servo holder or MYB0090-01 Aluminium long throttle servo holder for Mayako MX8

Mayako - Plastic Throttle Servo Arms 1x 23t, 1x 24t, 1x 25t for Mayako MX8

Mayako - Plastic Steering Servo Arms 1x 23t, 1x 24t, 1x 25t for Mayako MX8

Mayako - Plastic Sideguards (black) for Mayako MX8 (2 pcs)

Plastic Centre Diff Mount for Mayako MX8

Pipe Mount Wire for Mayako MX8

The STD Chassi for Mayako MX8

Long Main Chassis +4mm Rear for Mayako MX8

Aluminium steering servo arm 25t for Mayako MX8

Aluminium Brake Cams and Levers for Mayako MX8

Aluminium steering servo arm 23t for Mayako MX8

Aluminium Throttle Servo Arm 25t for Mayako MX8

Aluminium Throttle Servo Arm 23t for Mayako MX8

Aluminium throttle servo holder STD (short) for Mayako MX8

To use this engine mount, you also need MYB0078 Upper Engine Mount 2pcs for Mayako MX8

Pipe Mount Set for Mayako MX8

To use this engine mount, you also need MYB0078 Upper Engine Mount and MYB0077 Lower engine mount left and right for Mayako MX8

Fuel Tubing for Mayako MX8

Fuel Tank O-Ring for Mayako MX8

Fuel Tank Grommets for MYB0085 Fuel tank for Mayako MX8

Mayako - Fuel Tank for Mayako MX8

Fuel Tank and Radio Box Plastic Mounts for MYB0085 Fuel tank and MYB0096 Radio box set for Mayako MX8

Fuel Line Clips to use with MYB0085 Fuel tank to fit MYB0087 Fuel tubing for Mayako MX8

Easy adjustment brake linkage for Mayako MX8

Centre Diff Mount Cover and Carbon Fibre plate for Mayako MX8

Carbon fibre throttle servo tray to use between the servo and the MYB0091 Throttle servo brace for Mayako MX8

Carbon fibre steering servo tray, To mount on top of MYB0093 Aluminum steering servo tray posts for Mayako MX8

Updated Brake Pads with new material for longer life and smoother braking feel, for Mayako MX8. These pads work on all MX8 models

Brake Pad Screws, tubes and springs to insert in MYB0107 Brake Pads for Mayako MX8

Basic Engine (STD) mount for Mayako MX8

Aluminium throttle linkage threaded bushings inserted in MYB0101 Throttle linkage kit for Mayako MX8

Aluminium steering servo tray posts, inserted in MYB0094 Carbon servo tray for Mayako MX8

Aluminium steering servo mount for Mayako MX8

Long aluminium throttle servo holder for Mayako MX8

Air Filter Holder Set for Mayako MX8

Air Filter Foams 4pcs for Mayako MX8

These bearings is used for the Anti-roll bars front and rear and the brake levers in the centre carbon plate for Mayako MX8

To use the 2mm spacer, you need to use the MYB0011 Rear 2mm Plastic Gearbox Spacer so you can put the spacer in the MYB0013 Plastic Rear Brace for Mayako MX8

To use this spacer, you need MYB0085 fuel tank or MYB0013 Rear plastic brace for Mayako MX8

Carbon Fibre Rear Shock Tower for upper arms for Mayako MX8

Rear shock tower for upper arms for Mayako MX8

Carbon Fibre Front Shock Tower for upper arms for Mayako MX8

Rear Shock Spring Grey 80mm 10.75 for Mayako MX8

Rear Centre 115mm Universal Driveshaft used with MYB0001-01 Long +4mm rear chassi for Mayako MX8

Rear Centre 111mm Universal Driveshaft used with MYB0001 3mm (Stock) chassi for Mayako MX8

Front centre 78mm universal driveshaft for Mayako MX8

To use this dogbone, you also need MYB0120, Centre Dogbone Outdrive (2pcs) for Mayako MX8. This dogbone is intended for the +4mm length chassis MYB0001-01 for Mayako MX8

Rear 64,50mm (Stock) Shock Shafts 2pcs for Mayako MX8 (-2). New Revision(A) - Updated Threads

Black Rear Aluminium Shock Tower for MX8

Rear Shock Spring Brown 80mm 10.5 for Mayako MX8

Rear Shock Springs Black 80mm 10.25 for Mayako MX8

Rear CVD Bearing Crush Washers for Mayako MX8

Rear 16mm Shock Bodys for Mayako MX8

Plastic Bearing Bushings for the bearings in MYB0050 Plastic rear hub and MYB0050-01 Aluminum left or right rear hub for Mayako MX8

CVD Rear Axle for Mayako MX8

Complete Rear CVD Set Pair for Mayako MX8 (-22). Parts needed to run rear CVD: MYB0058 Complete Rear CVD Set MYB0168 13x19x4mm Ball Bearing MYB0048-01 Rear CVD Bearing Crush Washer

To use this dogbone, you also need MYB0120, Centre Dogbone Outdrive (2pcs) for Mayako MX8 This dogbone is intended for the standard length chassis MYB0001 for Mayako MX8

3-Shoe Clutch shoes with 1,0 springs for Mayako MX8

To use this dogbone, you also need MYB0120, Centre Dogbone Outdrive for Mayako MX8

Centre Dogbone Outdrives for Mayako MX8

Centre Differential Cup used with the diffrent centre main gears 47, 48, 49 for Mayako MX8

5x10x4 MXP High Performance Bearings to use with MYB0082 13t Clutch bell for Mayako MX8

Light weight 48t centre main gear, 5.5g in weight savings for Mayako MX8

6mm wheel hexes, use these on the new 3-piece rear hub.

Left KPI-0.5 Steering Knuckle for Mayako MX8 (22-24) This knuckle allows you to use front cvd or universal driveshaft

Left C-Hub KPI-1 Caster 2 with camber link insert included for Mayako MX8 (22-24) Remember to order lower KIng PIn for kpi-1, part: MYB0047A Fits on: MYB0042B-01 MYB0042B To use with old knuckles remove top red height shim.

Left C-Hub KPI-1 Caster 1 with camber link insert included for Mayako MX8 (22-24) Remember to get the new lower king pin for kpi-1, part: MYB0047A Fits on: MYB0042B-01 MYB0042B To use with old knuckles remove top red height shim.

Left C-Hub KPI-0.5 Caster 2 with camber link insert included for Mayako MX8 (22-24) You will need to get the lower King pin for this c-hub MYB0047-01 Fits on: MYB0042B-01 MYB0042B To use with old knuckles remove top red shim height

Left C-Hub KPI-0.5 Caster 1 with camber link insert included for Mayako MX8 (22-24) You will need to get the lower King pin for this c-hub MYB0047-01 Fits on: MYB0042B-01 MYB0042B To use with old knuckles remove top red shim height.

Stronger Steel Sterring Posts for MX8.

3-Shoe Flywheel with nut and Collet for Mayako MX8

To use this 13t Clutch bell, you need MYB0165 5x10x4 bearings or High performace bearings MYB0165MXP for Mayako MX8

Diffrent springs to use with the MYB0080 Clutch shoes for Mayako MX8

Diffrent springs to use with the MYB0080 Clutch shoes for Mayako MX8

Diffrent springs to use with the MYB0080 Clutch shoes for Mayako MX8

5x10x4 Bearings to use with MYB0082 13t Clutch bell for Mayako MX8

Light weight 49t centre main gear, 5.5g in weight savings for Mayako MX8

Light Weight 45t Front or Rear Ring Gear for Mayako MX8

Steering Top Plate for the MX8E.

These are the updated and corrected length of the steel steering links, the MYB0069 are shorter than they were supposed to be.

Steel Steering Knuckle short Bushings for Mayako MX8 (-22-24) - 4pcs Helps to have longer life on the steering knuckle, made for following knuckles: MYB0042B-01 MYB0042B MYB0043B-01 MYB0043B

Left KPI-1 Steering Knuckle for Mayako MX8 (22-24) This knuckle allows you to use front cvd or universal driveshaft

Middle and End Carbon Diff Height Insert for MYB0027B1

Short rear Dogbone for the MX8E.

Front Standard Dogbone for the MX8E.

2pcs per bag - insert used on new steering hubs and knuckles so you will be able to run higher or lower position on camber link just flipping the insert. Insert fits into MYB0039A-02 MYB0039A-03 MYB0039A MYB0039A-01 MYB0040A-02...

Front 54,50mm (Stock) Shock Shafts for Mayako MX8 (-21). New Revision (A) - Updated Threads

Lower King pins for KPI-0.5 C-Hubs

Right KPI-0.5 Steering Knuckle for Mayako MX8 (22-24) This knuckle allows you to use front cvd or universal driveshaft

Right C-Hub KPI-1 Caster 2 with camber link insert included for Mayako MX8 (22-24) Fits on: MYB0043B-01 MYB0043B To use with old knuckles remove top red shim height.

Right C-Hub KPI-1 Caster 1 with camber link insert included for Mayako MX8 (22-24) Remember to order lower King Pin for KPI-1, part: MYB0047A Fits on: MYB0043B-01 MYB0043B To use with old knuckles remove top red shim height.

Right C-Hub KPI-0.5 Caster 2 with camber link insert included for Mayako MX8 (22-24) Remember to order lower King Pin for KPI-0,5, part: MYB0047-01 Fits on: MYB0043B-01 MYB0043B To use with old knuckles remove top red shim height.

Right C-Hub KPI-0.5 Caster 1 with camber link insert included for Mayako MX8 (22-24) Remember to order lower King Pin for KPI-0.5, Part: MYB0047-01 Fits on: MYB0043B-01 MYB0043B To use with old knuckles remove top red shim height

B-Block for Mayako MX8 for Screw Type Inner Hinge Pin. These blocks are stock on -23 and newer models. They work on older models also, but you need to replace both blocks and use the screw type hinge pins.

Carbon fiber spacers for the A and D block height as well as front and rear shock tower height

Arm Hingepin for the new captured Hingepin Design

CVD Front or Rear 98mm Short Dogbone for Mayako MX8 to use with shorter Soft Arms MYA0034 on an MX8

Front 59,50mm (Long) Shock Shafts for Mayako MX8 (-21). New Revision(A) - Updated Threads

Steel Lower King Pins for KPI-1 C-Hubs

Steel King Pins 2pcs 0 and 2pcs +2 for Mayako MX8 (22-24) Used for top and bottom at kpi0 hubs, top on old kpi1. They are used for upper position for the latest c-hubs and knuckles. MYB0039A-02 MYB0039A-03 MYB0039A MYB0039A-01...